Which product is right for you?
AC Surge Protector 2P
AC surge protector, suitable for AC 50/60 HZ, rated voltage 230/440V three-phase power distribution system, satisfy the SPD, I class and Ⅱ class test.
RoHS material
AC SPD
According to EN 61643-31
Thermal disconnect inside for fault indication
3 years warranty
PRODUCT DESCRIPTION

AC surge protector, suitable for AC 50/60 HZ, rated voltage 230/440V three-phase power distribution system, satisfy the SPD, I class and Ⅱ class test. The peak shock current of the stage I protector is 5kA(10/350μs), and the charge is 25As,Ⅱ protector maximum discharge current level can up to 100 kA. It can suppress direct strikes, inductive strikes or other instantaneous overvoltages, discharge inrush energy, thus protects system circuits and load equipment. It has the advantages of I or II protection, large discharge capacity, low residual pressure, no leakage current, integrated module structure, easy installation, high safety factor, long service life and so on.

型号AC surge protector cooperates with each other to realize the layered protection system, so that the low-voltage distribution system can be more widely and effectively protected.

The surge protector is provided with a fail-safe device. When the protector breaks down due to overheating, the fail-safe detach device can automatically detach from the power grid and give an indication signal. When the protector is normal, the display window will show green, and after failure, the display window will show red.

Product Name:

AC Surge Protector 

Model Code:


Max.Continuous Operating Voltage Ucpv

275V AC  420V AC

Standard

EN 61643-31

Number of DC Poles

2P 4P

Max Discharge Current Imax

40KA

Nominal Discharge Current Imax

20KA

Protecting Rating

IP20

Certificate


INQUIRY US

Welcome to our website. If you have any requests or suggestions,please feel free to email us at info@moreday.com or use the following enquiry form. Please allow us to provide you with the best service.